Through our latest technology and careful research, Bidi Vapor has developed and improved the technology of the BIDI® Stick. Our efforts have resulted in an innovative vaping device that provides a premium experience. We use high-quality components, making them recyclable and long-lasting while giving smooth throat hits in one disposable vape pen.
What’s in a
Recyclability of the BIDI® Stick
01 / 11
Internal Fixation Base
It holds the heating coil assembly in place and acts as a
sealer to prevent leakage of the e-liquid to the battery and
controller in the device.
The device is made of food-grade silica gel and recylable to
more than 80%.
02 / 11
Fiberglass Tube A
It is a hollow tube with both ends
open. The small opening acts as a
pocket for the heating coil, while
the top end facilitates air supply
to the heating coil during vaping.
Fiberglass Tube B
It provides additional strength
to Fiberglass Tube A by covering
its open area. It also separates
the e-liquid and airflow channels.
After the glass fiber tube is discarded, it needs to be recycled and
specially scrapped to avoid environmental pollution.
03 / 11
Oil Storage Cotton
It acts as a storage tank for the e-liquid.
It can also be used as a renewable energy source for thermal power generation.
Its product recycling rate is more than 85%.
04 / 11
The heating coil is made up of a coil gauge that is
nickel-chromium alloy sparkles and organic cotton. It
vaporizes the e-liquid into vapor during use.
It has a recycling utilization rate of more than 90%.
05 / 11
Heat Shrinkable Tube
The shrinkable heat tube is an insulating bushing that
seals, insulates, is waterproof and dust-proof to prevent
The heat shrinkable pipe recycling utilization rate reaches 60%.
06 / 11
It seals the aluminum tube from the top and acts as a
mouthpiece for the device. This mouthpiece cover also
ensures a secured seal between the lips and the device.
The mouthpiece cover can be recycled to more than 90%.
07 / 11
Mouthpiece Seal Pad
It acts as a sealer to prevent leakage of e-liquid from going
into the mouth.
Made from food-grade silica gel, it can be recycled to more than 80%.
08 / 11
It is the protective body for the
controller and ensures that the
controller works properly.
It drives the battery and controls the stable output of the battery voltage.
The silica gel can be recycled
to more than 80%.
Its product cycle utilization rate
reaches at 75%.
09 / 11
It serves as the main body of the BIDI® Stick, where all
components get attached.
Recycled aluminum can save 95% of the resources needed for new aluminum production.
10 / 11
Oil Absorption Cotton
This oil absorption cotton absorbs the condensation
droplets to prevent them from being inhaled into
The product recycling rate exceeds 95%.
11 / 11
This seals the aluminium tube
to prevent the internal structure from
falling off. There is an intake hole at
falling off. There is an intake hole at the
bottom that takes air in through the bottom.
This seals the bottom cap to prevent
leakage during transportation and
keeps the bottom case clean and
The recycling rate of this material
is more than 90%.
The silica gel can be recycled to
more than 80%.
Main Advantages of the
The BIDI® Stick was designed and imbued with the latest technology to achieve and deliver a
premium experience for adults aged 18 years and over.
Patented Mouthpiece Technology
Sensitivity Control System
Consistent Nicotine Delivery System
Bidi Vapor has carefully and diligently researched, developed, and improved the technology of the BIDI® Stick. This has resulted in an innovative vaping device that provides a premium experience. The high-quality components make it recyclable and long-lasting while giving satisfying throat hits.
What’s in a BIDI® Stick?
Class A Nicotine
We use medical-grade nicotine (2%) formulated to deliver satisfying hits.
280 mAh Long-Lasting Battery
A high-quality cellphone-grade battery that is recyclable, and heavy-duty, which can last until all the e-liquid is deployed.
When combined with nicotine, benzoic acid allows the e-liquid to vaporise at lower temperatures.
Sensitivity Control System
Innovative technology with a sensitivity-sensor system to ensure that the user gets a consistent 2% nicotine in each draw. The pressure sensor will ensure only the right amount of vapour relevant to a person’s lung capacity.
UL 8139 Certification
With the recent acquisition of the UL 8139 certification, Bidi Vapor affirms its dedication to quality and adult customer satisfaction.
Medical-Grade Absorption Pad
The high-quality pad in the BIDI® Stick ensures a premium vaping experience.
Propylene Glycol and Glycerol
Both propylene glycol and vegetable glycerin are liquid bases that are responsible for producing thick clouds when exhaling.
The premium flavours of BIDI® Stick are a combination of both artificial and natural ingredients, which delivers an unforgettable taste profile.
Closed Pre-filled SystemTo ensure product safety, we designed the
BIDI® Stick to be tamper-resistant. This forward-thinking technology also hinders dubious usage after the BIDI® Stick is used up.
ISO 9001 & CGMP Certified
Bidi Vapor strictly complies with all manufacturing standards. From conceptualization to manufacturing. BIDI® has obtained the necessary certificates to ensure premium vaping experience.
Continuing Research and Development
As a company committed to innovation and quality, Bidi Vapor continually updates its scope of analysis to meet the changing industry standards. Currently, Bidi Vapor does the following testing services for its vapour.
- Nicotine (%)
- Diacetyl Screen (Diacetyl [2,3 butanedione], AcetylPropionyl [2,3-pentanedione], Acetoin)
- E-Liquid Constituents (DG, GLY, PG, DG, NIC, EG, DEG, Menthol)
- HPHC Carbonyls (Acetaldehyde, Acetone, Crotonaldehyde, Formaldehyde, Methyl ethyl ketone, Propionaldehyde)
- HPHC Metals (Arsenic, Beryllium, Cadmium, Chromium, Cobalt, Lead, Mercury, Selenium)
- NIST GC/MS Screen